How to set / change the Console timeout
July 21st, 2010
No comments
Archive
Archive for the ‘Network’ Category
Configuring and Verifying RIPv1 and RIPv2 ( Lab 2, Video Mentor, Routing )
July 18th, 2010
No comments
How to Recovery Cisco 2600 series router
May 26th, 2010
No comments
Download a Software Image to a Cisco 2600 via TFTP Using the tftpdnld ROMMON Command
Introduction
This document explains how to download a software image to a Cisco 2600/2800/3800 Series Router using Trivial File Transfer Protocol (TFTP) over the first LAN port using the ROMmon tftpdnldcommand.
Enable ASDM from Command Line
May 24th, 2010
No comments
username xxx password yyy privilege 15
http server enable
http 0.0.0.0 0.0.0.0 Inside
http redirect Inside 80
Simulate ISDN over BRI Port
May 22nd, 2010
No comments
Configure Netflow in ASA5505
May 20th, 2010
No comments
Enable NetFlow in Cisco Device
May 16th, 2010
No comments
ip flow-export source FastEthernet0/1
ip flow-export version 5
ip flow-export destination 192.168.3.2 9996
Before Enable Net Flow,
Set Router Time, Eg:
#clock set 20:18:00 20 May 2010
Basic Router Configuration ( NAT & Branch Office WAN Link )
May 15th, 2010
No comments
Basic Router Configuration ( NAT on HQ & Branch Office WAN Link )
